2.1A Instant Start 200W UV Lamp Power Supply for Amalgam UV Bulb
110V-240V 2.1A Instant Start 200W UV Lamp Power Supply for Amalgam UV Bulb
Product Parameters for this 200W UV Lamp Power Supply
| Start Mode | Instant Start |
Operating Voltage Range | 99-264 |
Max Input Power | 217W |
Max Input Current | 0.96A @ 230V , 1.92@110V |
Lamp Power | 200W Amalgam UV Lamp |
Lamp Current | 2.0-2.2A |
Operating Frequency | 40-70KHZ |
Preheat Time | 14-15 S |
Preheat Current | 2.7-2.9A |
Power Factor | ≥ 0.98 |
Efficiency | >90% |
Total Harmonic Distortion | <15% |
Crest Factor | <1.7 |
Ambient Humidity | 5%-85% |
Ambient Temperature | -15-40℃ |
Max Case Temperature | 70℃ |
Case Material | Aluminum Shell |
Safety Norm | EN61347-1-2-3, EN62493 |
LVD Norm | Low voltage Directive 2014/35/EU |
EMC Norm | EN55015, EN55014, GB17743, GB17625, EN61000-3-2 |
Certificates | CE/UL/CCC |
Product Features for Ballast for UV Lamps
1> This 200W amalgam uv lamp ballast, is with high power factor. energy efficient. money saving
2> This uv disinfection ballast is with worldwide universal voltage, can work with 110V and 230V input.
3> This uv lamp ballast with reliable quality, less than 0.3% repair rate,within warranty.
4> We offer OEM and ODM service for this uv-c lamp ballast .
Dimension for this UV Disinfection Germicidal Ballast
Size: 250*65*40mm Carton Size: 460*270*190mm(18PCS load)
Wiring Diagram for this UV Lamp Power Supply
Wiring diagram A 1 Lamp: GPHHA843T6, GPHA1000T6
Wiring Diagram B 2 Lamps: GPHA357T6, GPHHA357VHT6
Cautions:
1. Please make sure the power is off when you install or maintain the ballast
2. The distance between ballast and lamp tube should no longer than 5M.
3. The suggested wire specific: diameter 0.5-1mm, wire stripping 0.8-1mm
4. The aluminum shell should be grounded.
